Drop an audio file, or click to choose
MP3 · WAV · M4A · OGG · FLAC
Calculated in your browser from the decoded audio. Nothing is uploaded — the analysis runs on your device.
If you were hunting for a key and tempo finder, this page covers the tempo half — for the key, the key finder reports it alongside the BPM. When you only need the beats per minute, this is the quicker stop than a full find key and bpm pass: drop a file or tap the beat and you have the tempo in seconds.
Supported formats
Any audio your browser can decode — typically MP3, WAV, M4A / AAC, OGG and FLAC. If the browser cannot read a file, this page says so instead of guessing.
How it's calculated
The file is decoded into raw samples in your browser. We measure the onset envelope — where the sound gets louder — pick the steady beats, and read the time between them. Beats per minute is simply 60 ÷ seconds-per-beat. No audio leaves your device, and no beat is ever assumed; if there is no steady pulse, you get an honest “couldn’t detect” instead of a number.
When it may be off
A tempo detector follows one pulse. It reads best on a clear, steady beat — a drum loop, a click, a metronome, a solo performance. It can struggle with very dense or polyphonic mixes, tracks that drift in tempo, ambient pieces with no clear beat, or short loops — anything under about ten seconds rarely repeats the beat enough times to count automatically. For loops shorter than ten seconds, tap the beat in by hand: click Tap in rhythm, keep time with the music, and the page turns your taps into a BPM. And a detector often lands an octave away — it may report 80 when the track is 160, or 160 when it is 80. That is exactly why the Half and Double buttons are right there: tap the one that matches what you hear.
Questions people ask
What is a BPM finder?
A BPM finder is a tool that tells you the tempo of a song — how many beats per minute it runs at. This one does it in your browser: you drop in an audio file (or tap the beat) and it shows the BPM.
How do I find the BPM of a song?
Drop the audio file onto the box above, or click to choose it. The page decodes it locally and shows the tempo. No account, no upload, no waiting on a server.
Can I find BPM by tapping instead of uploading?
Yes. Click Tap in rhythm in time with the music. The page turns your tap spacing into a BPM, which is handy when you don't have a file or just want a quick count. For a full-screen pad that reports to two decimal places, there is a dedicated tap tempo page.
The page couldn’t detect my loop’s tempo — what now?
Loops shorter than about ten seconds — a two-bar drum loop, an exported sample, a snippet — often don’t repeat the beat enough times for an automatic count, and this page would rather say so than guess. For loops shorter than ten seconds, tap the beat in by hand: play the loop, click Tap in rhythm, and tap along with the beat. Your tap spacing is converted into a BPM, which is usually more accurate than a guess.
Why is the detected BPM half or double the real tempo?
Tempo detectors often land an octave away from the true beat — reporting 80 for a 160 BPM track, or vice versa. Use the Half and Double buttons to slide to the value that matches what you hear; the math is the same, only the interpretation changes.
Is my audio uploaded anywhere?
No. Decoding and tempo analysis both run in your browser, so the audio stays on your device. This page makes no network requests with your file.